Wire Stripper Cutter
 |
 XCELITE 104CGV 8 1 4 WIRE STRIPPER CUTTER WITH CUSHION GRIP HANDLES  US $46.96
|
 Klein 11045 INS Insulated Wire Stripper Cutter US $41.99
|
 Klein Tools 11055 Klein Kurve Wire Stripper Cutter US $38.93
|
 KD 3794 MINI WIRE CUTTER STRIPPER CRIMPER 3 PC SET US $31.49
|
 Innovative Products 2 in 1 Wire Cutter Strippers US $30.96
|
 Klein Tools 11047 Flat Design Wire Stripper Cutter US $30.47
|
 CB Electrical Wire Cutter Stripper Crimper w Access Plastic Case US $30.00
|
 New Paladin Stripper Cutter For Round Wire Flat Cable US $29.99
|
 KD Tools 2162 Wire Stripper Cutter Crimper US $28.91
|
 STANLEY 84 199 WIRE STRIPPER CUTTER CRIMPER US $27.64
|
 Klein Tools 11057 Wire Stripper Cutters US $27.20
|
 Stanley 84 199 Wire Stripper Cutter US $26.58
|
 Vintage 8 Cornwell Wire Stripper Cutter US $19.99
|
 Wire stripper steel wire cutter Crimping tool 7in1 tool US $19.99
|
 STANLEY 84 213 WIRE STRIPPER CUTTER US $19.33
|
 Channellock 958 6 1 4 Inch Wire Stripper and Cutter US $19.30
|
 Klein Tools 11046 Wire Stripper Cutter US $19.28
|
 Wire Stripper Cutter Stripper Terminal Crimper HS D1 US $19.00
|
 Klein 11055 Klein Kurve Wire Stripper Cutter Blue US $18.66
|
 FALCON TOOLS ModelFA5605 6 WIRE CUTTER STRIPPERNEW US $17.99
|
 Self Adjusting Wire Stripper Cutter For Cable Wire US $17.90
|
 CHANNELLOCK WIRE STRIPPER CUTTER CL957 US $17.79
|
 Klein Tools 11055 Wire Stripper Cutters US $17.69
|
 Klein Wire Stripper Cutter 10 18 AWG NEW US $17.42
|
 1011 Klein Tools Wire Stripper Cutter Solid And Stranded Wire US $17.00
|
 Klein 11045 Wire Stripper Cutter 10 18 AWG NEW US $16.99
|
 Klein 11048 6 1 4 Inch Dual Wire Stripper Cutter US $15.56
|
 Irwin 2078305 Vise Grip 5 Inch Wire Stripper and Cutter US $15.40
|
 Wire Stripper Cutter Pliers Manual Tool Yellow Black US $15.22
|
 11045 Klein Tools Wire Stripper Cutter US $15.00
|
 KD Tools 2162 Wire Stripper Cutter Crimper US $14.95
|
 2 in 1 Wire Stripper Cutter Orange Red for Electrician US $14.38
|
 Yellow Black Metal Plastic Wire Stripper Cutter Pliers US $13.58
|
 Cable Wire Striping Cutter Stripper Pliers Hand Tool US $13.43
|
 AWG 16 26 Wire Stripper Cutter Plier Electrician Tool US $13.28
|
 Yellow Blk Plastic Handle Wire Stripper Cutter Crimper US $13.27
|
 Cutter Stripper Cutting wire30mm maxstripping wire 6 16mmcrimping terminals US $12.99
|
 Klein Kurve 11055 Wire Stripper Cutter US $12.95
|
 Yellow Plastic Handle Wire Stripper Cutter Pliers Tool US $12.35
|
 Kronus Automatic Wire Stripper Cutter US $11.97
|
 Millimeter Inch Scale Orange Handle Metal Wire Stripper Cutter Pliers US $11.86
|
 Orange Grip Wire Stripper Cutter Pliers Hand Tool US $11.82
|
 Orange Black Nonslip Handle Wire Stripper Cutter Plier US $11.82
|
 Anti slip Red Handle Automatic Wire Stripper Cutter 7 US $11.56
|
 05mm 22mm Automatic Wire Stripper Cutter Hand Tool US $11.50
|
 Klein 1011 Wire Stripper Cutter Solid and Stranded Wire Blue 6 1 8 Inches US $11.23
|
 Klein 11045 Wire Stripper Cutter US $11.05
|
How To Install A Car Stereo
If you have little cash but want a better sounding stereo system in your vehicle, installing a stereo yourself can save you a tremendous amount of money. It is relatively easy to install a new CD player or radio in your car, especially if you have had any experience in wiring or electronics.
The standard car stereo system is installed in the dash; therefore, this article will provide the steps necessary to complete this task. Custom or modified vehicles will require a different set of instructions for stereo installation. For this task you will need a new car stereo or CD player (which is also called a head unit), wire strippers, electrical tape, a screwdriver set, and wire cutters. You will also need a guide outlining how to remove your dash panel and how to adequately remove the old stereo system without causing any damage. By following these simple steps, you will be enjoying your new stereo in no time!
1) Buy a new stereo system. Purchase one that fits properly where your old one was located. In addition, when purchasing a stereo you might wish to get a specific wiring harness which is specific for your new stereo and your vehicle's make and model. Wiring harnesses make the whole wiring job a snap, literally.
2) Make sure the engine is turned off. Disconnect the negative (black) battery cable. Never work on any part of your car's electrical system with the battery connected, as the electrical shock could be fatal.
3) According to your manual, remove the dash panel surrounding your stereo. Unscrew and remove your old stereo (head) unit. On the back of the unit there will either be a batch of individual wires or one single plug connecting a lot of wires. If you find a whole bunch of wires, do not take them apart just yet. You will need to do them one at a time in a few moments in order to avoid confusion.
4) Wiring can be connected manually or with the wiring harness. If you have a wiring harness do step 5, then skip to step 9. If you do not have a wiring harness, skip step 5, and follow steps 6 through 8.
5) Plug your new wiring harness into the connector, if you were able to purchase one. This wiring harness will then plug into the backside of your new car stereo. If you were able to do this, then you can skip steps 6-8.
6) You will need to connect each of the wires manually if you did not buy a wiring harness. Connect positive wires from each of your speakers to positive connectors on the backside of your stereo first. Next, connect negative wires from each of your speakers to negative connectors on the stereo. If you find only one wire coming from each speaker this means that they have been grounded at the chassis. If this is the case, new speaker wiring must be installed.
7) Connect the -/black (ground) wire on the stereo to a bolt or screw near where the stereo is mounted within the dash. This attachment must be made to metal, not fiberglass or plastic.
Connect both +/red ignition power wires and the 12 constant wires to the new radio. Refer to the installation manual for correct placement of these wires.
9) You should now have a single connecter which is can be hooked to the proper wires in your vehicle, either through the new connection made in steps 6-8 or from your wiring harness.
10) Slide the new stereo into your mounting bracket, which should have been included with purchase. In some cases, you may need to use your old bracket from your original stereo.
11) Plug the wiring harness connector into the backside of your new radio or CD player. You should see one, single wire hanging unaccounted for, coming from your old system. This wire is your antenna. Plug this wire into your new stereo unit. You may also see a power antenna wire, which must be connected as well.
12) Slide the stereo into dash slot. Test it before screwing it in. Reconnect your battery cable. Start your engine to power up the stereo. Turn on some music and listen for the performance of each speaker. If everything seems to be working well, screw your stereo into place and replace your dash cover.
About the Author
Bond Mejeh produces automotive related articles for Quick Cash Auto, a cash for cars service. Quick Cash Auto not only buys pre-owned vehicles of any year, make or model, but they also provide numerous articles about vehicle repair and automotive news.
Please visit QuickCashAuto.com for more information and be sure to check out our automotive blog.
does anyone have a plug in wire stripper for sale and a pair of hydrolic cable cutters for sale.?
I would like to by the items above if you have them or know where I can purchase them from please let me know.
marcr1@ntlworld.com
no
Wire Cable Stripper Cutter Pliers WTS-369C from Dinodirect.com
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.