Flux Grease
 |
 Japan Senju Flux Grease Gel Solder Sparkle Paste 500g  US $69.69
|
 Lead Free Low Temperature Flux Grease Solder Paste 500g US $50.79
|
 Japan Flux Grease Gel Repair Solder Paste MK 50L 500g US $41.29
|
 Japan Flux Grease Repair Solder Paste MK E508RMA 100g US $30.29
|
 New Soldering Solder For BGA Flux Paste Grease Gel US $10.89
|
 150g Flux Soldering Paste Grease Gel for BGA SMD US $9.99
|
 Weak Acid Soldering Solder Paste Flux Grease Paste New US $4.88
|
 1PCS 10cc RMA 223 Soldering Solder Flux Type Grease US $4.49
|
 ADVANCED SOLDER SOLDERING WELDING PASTE FLUX GREASE 50G US $4.36
|
 10pcs BGA SMD Soldering Paste Flux Grease RMA 223 10cc US $3.99
|
 Weak Acid Soldering Solder Paste Flux Grease Paste New US $3.98
|
 Advanced Soldering Solder Paste Flux Grease Gel For BGA US $3.43
|
 BGA Solder Soldering Paste Flux Grease RMA 223 10 CC US $2.77
|
 Soldering Paste 10cc Flux Grease RMA223 RMA 223 BGA PGA US $2.75
|
 Advanced Solder Soldering Paste Flux Grease RMA 223 US $2.75
|
 Solder Soldering Paste 10cc Flux Grease RMA 223 for PGA US $2.75
|
 Solder Soldering Paste 10cc Flux Grease RMA223 RMA 223 US $1.99
|
 Solder Soldering Paste 10cc Flux Grease RMA 223 for BGA US $1.99
|
 Repair Tool Solder Soldering Paste Flux Grease US $1.56
|
 Repair Tool Solder Soldering Paste Flux Grease C US $1.45
|
 Advanced Solder Soldering Paste 10cc Flux Grease RMA223 US $1.19
|
Ultrasonic Cleaner For Environment Friendly Cleaning Of Electronic And Electrical Device Connectors
Connectors are plug and socket units that are used to connect wires and cables. They’re utilized in computer systems and different electronic gadgets the place they facilitate the info transmission process.
Interconnects are elements which are utilized in digital circuits to connect devices. Hundreds of them are used in quite a few products. Over a period of time, dust, grease, flux and other contaminants accumulate within the circuits and electric plugs and sockets. These contaminants could render the fiber optic and electric connectors and interconnects useless. The best way to scrub these delicate components with out causing any potential injury or harm is to make use of an ultrasonic cleaner.
For ultrasonic cleansing the process is fairly simple and straight forward. Pour the cleansing solvent into the tank, carefully place the parts that wants cleaning in the tank, be sure that the parts are fully immersed in the cleansing liquid and then energy on the ultrasonic cleaner. Ultrasonic cleaners or sonicators have transducers that generate ultrasonic sound waves fastened to the stainless steel tank’s sides. These vibrate at frequencies which are instantly proportional to the facility of the electric motor. The ultrasonic waves which are generated agitate the cleansing liquid medium that’s both plain water or the solvent-based. The agitation causes the formation of tiny microscopic bubbles that subsequently implode releasing an brisk stream of liquid vitality that breaks the floor adhesion of the contaminant. This course of is named cavitation.
These high energy, power packed bubbles successfully collide with the outside of the connectors and interconnects which might be positioned within the cleansing chamber. When the bubbles implode the liquid vitality jet launched through the implosion dislodges the contaminant without damaging the surface of the connectors.
For cleansing delicate elements, ultrasonic cleaners have a smart and clever built-in expertise referred to as the sweep mode. This function ensures that no dead zones are fashioned within the cleansing liquid. Dead zones are areas in the cleaning liquid where no ultrasonic cleaning activity occurs. It would be a good idea to choose an ultrasonic cleaner with a sweep function if you could clear units that have complicated and intricately designed components with blind holes, crevices, etc. Aside from this sweep expertise, one other extremely helpful characteristic is the auto-degassing option. The degassing feature will increase the efficacy of the ultrasonic cleansing process. The auto-degassing course of removes trapped gases from the cleaning liquid. That is made potential by a specifically designed ultrasonic vibration mode that's used solely for high precision cleaning. Fuel bubbles in the liquid additionally impede cavitation. Auto degassing ensures that the cleansing liquid is prepared for cleaning.
An added advantage of ultrasonic cleaning: the identical cleaning fluid is effective for a lot of runs earlier than its cleansing energy diminishes. You do not want a fresh cleansing answer every time you clean. To recycle the cleaning solution drain the tank after the cleansing cycle, filter the solvent to remove all of the dirt from the cleansing session, rinse and wash the tank, and store the cleansing solution for reuse in the course of the subsequent cleansing session.
About The Writer
Daniel has been writing articles on-line for practically 5 years now. Not only does this author concentrate on Computers and Technology, it's also possible to check out his latest website on easy methods to convert MP4 to WMV with MP4 to WMV converter which also helps people find the best MP4 to WMV converter on the market.
Solder won't stick to wire?
I'm trying to solder some wire together (not electrical wire), but the solder won't stick. Here's some stats for more detail:
*Wire: 13 gauge (SWG)
*Solder: 1mm, wit flux core
*Soldering iron: Stanley brand, 450W
I've thoroughly cleaned both the wire and soldering iron tip, with sandpaper and soldering grease. I've even tinned the iron tip a couple times. But the solder is still not sticking to the wire.
This is for a project, which is due soon, so I really need an answer ASAP. Please help?! 
Thanks.
The wire ISN'T electrical wire, it's pretty much the same stuff coat hangers are made of.
As for the flux, my solder is has a rosin flux core.
And the wire is definitely NOT copper.
I've tried heating both materials, and it's still not working.
Thanks for the answers so far. 
Some wire is nickel plated and doesn't take solder very well. You need to use a rosin flux on the wire and a hotter soldering iron temperature. The watts of a soldering iron is only important when soldering larger objects. Try a 700 or 800 degree temperature. Give the wire a second or two to get hot. Between the temperature and the flux the wires should solder. This will also work for stainless steel. Aluminum needs special aluminum solder and flux.
Interbike 2009 - Turner Bicycles - FLUX DW Link Grease Fittings XC All Mountain
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.